E-Primer I EP-1741 АC HS

E-Primer I EP-1741 АC HS

EPOXY PRIMER

A two-component epoxy primer with a high content of zinc phosphate and high solids content for long-lasting protection of metal surfaces.

Category: Tags: , , , ,

Description

• Excellent adhesion to ferrous and non-ferrous metals (e.g., aluminum, hot-dip galvanized surfaces).
• Heat resistance of the film up to 200°C.
• Usable at low temperatures (down to –5°C);
• Resistant to solvents, acids, bases, and their vapors;
• Fast-drying product;
• Compatibility with various organic-based top coatings;
• Ability to apply in thick layers without sagging – up to 220 μm.
• Forms a water- and vapor-impermeable coating.
• High elasticity and resistance to linear expansion.

Purpose

This coating is suitable for protecting industrial facilities, metal structures, and others, operating under atmospheric corrosion and harsh industrial conditions. It is characterized by exceptional strength and abrasion resistance. It can be applied as a standalone coating in operating environment C3 (ISO 12944-2) or as a primer in an anticorrosion system in severe environments C4/C5 (ISO 12944-2). It is suitable for use at very low temperatures (down to –5°C).

ColorAccording to sample/RAL catalog
Gloss0 - 10 %
AppearanceThixotropic mass
Theoretical consumption rate113 – 127 g/m2 for a 60 μm dry film
Density1.60 – 1.80 kg/l
Solid content85 %
Shelf life36 months
VOC264 g/l
Drying Stage20°C30°C
Touch dry 1 hour 45 minutes
Fully dry 4 hours 3 hours
Fully cured 24 hours 18 hours
Recoat interval after 2 hours after 2 hours
Pot life 6 hours 5 hours 10 minutes

Related products

  • Read more

    THINNER

    EP-500

    Used for thinning epoxy resins, primers, paints, varnishes, and all Bulmat cold galvanizing products. Speeds up drying and reduces the time needed for applying subsequent coats. Characterized by a mild and non-intrusive odor. Excellent for cleaning paint brushes, rollers, spray guns, and pumps after use. Also suitable for degreasing metal surfaces.

Related products